Concrete Installation Dispute Resolution
Summary
In Pasadena, California, a homeowner experienced significant concrete cracking due to a contractors failure to use required wire mesh, breaching the contract. The contract mandates arbitration for disputes. To address this, communicate with the contractor, document all interactions, and propose a solution. Consult a structural engineer for an assessment and prepare for arbitration by gathering evidence and expert opinions. Contact the Pasadena Building and Safety Division to verify local building code requirements for concrete work.Full Conversation
I had a new drive way installed in Pasadena California. A large crack appeared the next day. I have video evidence of the workers applying undue pressure where the major crack occurred. The crack goes through the *" thickness of the concrete, and runs about *" long. I found out the contract states they will use wire mesh but they did not.
It seems like you have a strong case due to the breach of contract and possible negligence. Would you like assistance in connecting with local lawyers in Pasadena who can help you pursue this matter further?
I'm wondering how to first work it out with the contractor. They are also the same contractor who is remodeling the house where there are no issues to complain about. Also, the contract states we must go to arbitration.
Since your contract requires arbitration, here are some steps you can take to address the issue with your contractor before proceeding:
- Communicate: Start by discussing the issue directly with the contractor. Explain the problem and show your video evidence.
- Document: Keep records of all communications and any agreements or resolutions discussed.
- Propose a Solution: Suggest a reasonable solution, such as repairing the damage at no extra cost.
- Prepare for Arbitration: If an agreement can't be reached, gather all evidence and documents for the arbitration process.
Would you like more details on preparing for arbitration?
- Communicate: Start by discussing the issue directly with the contractor. Explain the problem and show your video evidence.
- Document: Keep records of all communications and any agreements or resolutions discussed.
- Propose a Solution: Suggest a reasonable solution, such as repairing the damage at no extra cost.
- Prepare for Arbitration: If an agreement can't be reached, gather all evidence and documents for the arbitration process.
Would you like more details on preparing for arbitration?
I'm more concerned about the strength of the drive way and parking areas that had concrete applied. The mesh is a requirement to reduce the chances of cracking. The whole areas concreted is over * feet.
Case Rating: *
Given the size of the area and the lack of required wire mesh, this is a significant issue.
To address your concerns:
- Consult a Structural Engineer: Assess the integrity of the entire area.
- Discuss with Contractor: Address the lack of wire mesh.
- Prepare for Arbitration: Collect evidence and expert opinions.
Would you like more information on preparing for arbitration or any other guidance?
Given the size of the area and the lack of required wire mesh, this is a significant issue.
To address your concerns:
- Consult a Structural Engineer: Assess the integrity of the entire area.
- Discuss with Contractor: Address the lack of wire mesh.
- Prepare for Arbitration: Collect evidence and expert opinions.
Would you like more information on preparing for arbitration or any other guidance?
sure, yes please
Case Rating: *
It sounds like you're dealing with a serious issue regarding the integrity of the concrete work and the breach of contract terms. Here are a few more steps for preparing for arbitration:
- Find a Qualified Arbitrator: Ensure they are experienced in construction disputes.
- Gather Expert Opinions: Expert assessments strengthen your case.
Would you like more guidance on any specific aspect?
It sounds like you're dealing with a serious issue regarding the integrity of the concrete work and the breach of contract terms. Here are a few more steps for preparing for arbitration:
- Find a Qualified Arbitrator: Ensure they are experienced in construction disputes.
- Gather Expert Opinions: Expert assessments strengthen your case.
Would you like more guidance on any specific aspect?
Thank You, this is a good start. I can take it from here.
Case Rating: *
It sounds like you have a significant issue with your contractor, given the breach of contract and the potential structural integrity concerns. If you need further assistance or decide later that you'd like to connect with a lawyer, feel free to reach out again. Best of luck resolving the matter!
It sounds like you have a significant issue with your contractor, given the breach of contract and the potential structural integrity concerns. If you need further assistance or decide later that you'd like to connect with a lawyer, feel free to reach out again. Best of luck resolving the matter!
Thanks again!
It looks like you've already received some detailed guidance on handling your situation with the contractor, especially considering the breach of contract and potential structural issues. If you need further assistance or decide to seek legal support, don't hesitate to reach out. Best of luck with everything!
I have another question about this situation, if that's OK. Do you know if the wire mesh is required by the city of Pasadena California?
Case Rating: *
In Pasadena, California, the use of wire mesh in concrete work is typically guided by building codes and standards. Generally, wire mesh is recommended for large concrete areas to enhance strength and prevent cracking. However, specific requirements may vary, so consulting local building codes or a structural engineer would be wise. Would you like more details on how to verify these requirements?
In Pasadena, California, the use of wire mesh in concrete work is typically guided by building codes and standards. Generally, wire mesh is recommended for large concrete areas to enhance strength and prevent cracking. However, specific requirements may vary, so consulting local building codes or a structural engineer would be wise. Would you like more details on how to verify these requirements?
yes please
Case Rating: *
In Pasadena, checking the city's building codes for concrete work is essential. You can:
- Contact the Pasadena Building and Safety Division for specific code requirements.
- Consult a local structural engineer to ensure compliance and safety.
Would you like further guidance on how to proceed with this verification?
In Pasadena, checking the city's building codes for concrete work is essential. You can:
- Contact the Pasadena Building and Safety Division for specific code requirements.
- Consult a local structural engineer to ensure compliance and safety.
Would you like further guidance on how to proceed with this verification?
yes on contacting the city
Case Rating: *
To contact the city of Pasadena, you can reach out to their Building and Safety Division. They can provide you with the specific building code requirements for concrete work, including the use of wire mesh. Checking their website or contacting them directly will give you the necessary details.
To contact the city of Pasadena, you can reach out to their Building and Safety Division. They can provide you with the specific building code requirements for concrete work, including the use of wire mesh. Checking their website or contacting them directly will give you the necessary details.
thank you
Case Rating: *
It seems like you have a strong basis for addressing the issue with your contractor, especially considering the breach of contract and potential structural concerns. If you need any further assistance or have more questions, feel free to reach out!
It seems like you have a strong basis for addressing the issue with your contractor, especially considering the breach of contract and potential structural concerns. If you need any further assistance or have more questions, feel free to reach out!